Ir para o conteúdo principal

Zoomer Jurassic World Indominus Rex Back Cover Replacement

O que você precisa

  1. Zoomer Jurassic World Indominus Rex Back Cover Replacement, Back Cover: passo 1, imagem 1 %32
    • Turn off and unplug Zoomer Jurassic World Indominus Rex from any power source before doing replacements.

    • Remove all eight (8) 9.3mm Phillips screws using Phillips #1 screwdriver.

  2. Zoomer Jurassic World Indominus Rex Back Cover Replacement: passo 2, imagem 1 %32 Zoomer Jurassic World Indominus Rex Back Cover Replacement: passo 2, imagem 2 %32
    • Pry apart the back cover of the Jurassic Indominus Rex and the rest of the body using a spudger.

    • Do not take out the back cover immediately as it it still attached to the motherboard by a wire.

  3. Zoomer Jurassic World Indominus Rex Back Cover Replacement: passo 3, imagem 1 %32 Zoomer Jurassic World Indominus Rex Back Cover Replacement: passo 3, imagem 2 %32
    • Disconnect the orange wire that connects the motherboard and the back cover.

    • Separate the back cover and the rest of the Zoomer Jurassic World Indominus Rex.

    • Gently press the tab on the side of the orange connector if you are having trouble disconnecting the wire.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Anh Le

Membro desde: 01/20/16

504 Reputação

Autoria de 3 guias

Equipe

USF Tampa, Team 10-3, Remmell Spring 2016 Membro de USF Tampa, Team 10-3, Remmell Spring 2016

USFT-REMMELL-S16S10G3

Membros da 4

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 12

Duração total: 393