Introdução
Use the following guide to replace the rubber roller of the ZP 505 with just your bare hands.
-
-
Orient the printer so the front is facing you.
-
Locate the two tabs on opposite ends of the printer.
-
Place your fingers on the rollers, push outward and lift upwards.
-
-
Quase terminado!
To reassemble your device, follow these instructions in reverse order.
Conclusão
To reassemble your device, follow these instructions in reverse order.
Equipe
Cal Poly, Team S8-G2, Banghart Fall 2017 Membro de Cal Poly, Team S8-G2, Banghart Fall 2017
CPSU-BANGHART-F17S8G2
Membros da 4
Autoria de 10 guias
