Conserte seus objetos Comunidade Loja

Zeal Optics iON Viewfinder Lens Assembly Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

Introdução

This guide is a prerequisite to removing the viewfinder lens and/or LCD.

O que você precisa

  1. Zeal Optics iON Viewfinder Lens Assembly Replacement, Viewfinder Lens Assembly: passo 1, imagem 1 %32 Zeal Optics iON Viewfinder Lens Assembly Replacement, Viewfinder Lens Assembly: passo 1, imagem 2 %32

    • Remove the two 7.5 mm Phillips screws on the front of the viewfinder housing.

    • Flip the viewfinder housing over 180 degrees.

    • Remove the four 7.1 mm Phillips screws from the back of the viewfinder housing.

    Editar

  2. Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 2, imagem 1 %32 Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 2, imagem 2 %32

    • Pull the two halves of the viewfinder housing apart.

    Editar

  3. Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 3, imagem 1 %32 Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 3, imagem 2 %32

    • Use the tip of a spudger to flip up the retaining flap on the LCD ribbon cable ZIF connector.

    • Be sure to pry up on the hinged flap, not the connector itself.

    Editar

  5. Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 4, imagem 1 %32 Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 4, imagem 2 %32

    • Use the tip of a spudger to push out the retaining clip on the viewfinder backlight ribbon cable ZIF connector.

    Editar

  6. Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 5, imagem 1 %32 Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 5, imagem 2 %32

    • Using your fingers or tweezers, gently pull out the backlight ribbon cable from its connector on the button board.

    Editar

  7. Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 6, imagem 1 %32 Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 6, imagem 2 %32

    • Using your fingers or tweezers, remove the LCD ribbon cable from its connector on the button board.

    Editar

  8. Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 7, imagem 1 %32 Zeal Optics iON Viewfinder Lens Assembly Replacement: passo 7, imagem 2 %32

    • Remove the viewfinder lens assembly from the viewfinder housing.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Eric Flores

Membro desde: 07/31/12

128 Reputação

Autoria de 9 guias

Emblemas: 8

+5 outros emblemas

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 240