Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

As it controls the whole phone, knowing how to remove the motherboard of the ZTE Speed is important.

Peças

Nenhum componente especificado.

  1. Pull off back cover at bottom right corner. Pull off back cover at bottom right corner.
    • Pull off back cover at bottom right corner.

  2. Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom. Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.
    • Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.

  3. Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch

    Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch
  4. With the plastic opening tool the spudger, gently pry off the inner back. Be careful not to pry it off too hard, as it is just a plastic covering.
    • With the plastic opening tool the spudger, gently pry off the inner back.

    • Be careful not to pry it off too hard, as it is just a plastic covering.

  5. Remove the one 2.381mm Phillips head screw from the motherboard located in the upper-middle part of the phone next to the bottom left corner of the back camera.
    • Remove the one 2.381mm Phillips head screw from the motherboard located in the upper-middle part of the phone next to the bottom left corner of the back camera.

  6. Using the spudger, gently pry up all ZIF connectors ZIF connectors have a tiny tab that needs to be flipped up  in order to safely remove the cable Using same spudger, gently pry up the orange flat top connector
    • Using the spudger, gently pry up all ZIF connectors

    • ZIF connectors have a tiny tab that needs to be flipped up in order to safely remove the cable

    • Using same spudger, gently pry up the orange flat top connector

  7. Carefully take off motherboard. Carefully take off motherboard.
    • Carefully take off motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Garrett Barry

Membro desde: 04/03/2016

722 Reputação

5 Guias de autoria

Equipe

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 643