Conserte seus objetos Comunidade Loja

ZTE Blade Spark Rear-Facing Camera

Introdução

Follow this guide to disassemble the ZTE Blade Spark device and replace the rear-facing camera.

  1. ZTE Blade Spark Rear-Facing Camera, ZTE Blade Spark Rear-Facing Camera: passo 1, imagem 1 %32

    • First, apply heat evenly on the back cover using a heat sack to soften the adhesive.

    Editar

  2. ZTE Blade Spark Rear-Facing Camera: passo 2, imagem 1 %32

    • Now, carefully remove the back cover.

    Editar

  3. ZTE Blade Spark Rear-Facing Camera: passo 3, imagem 1 %32

    • Once opened, Locate and remove all exposed screws using a Phillips-Head screwdriver and set them aside.

    Editar

  4. ZTE Blade Spark Rear-Facing Camera: passo 4, imagem 1 %32

    • To remove the inner white panel/cover, use a plastic opening tool to loosen from each side.

    Editar

  6. ZTE Blade Spark Rear-Facing Camera: passo 5, imagem 1 %32

    • After removing the white plastic panel, you should see a black metal battery cover.

    • To remove the metal battery cover, remove the screws from the panel using a Phillips screwdriver if you have not yet done so.

    Editar

  7. ZTE Blade Spark Rear-Facing Camera: passo 6, imagem 1 %32

    • Then, simple lift to remove the metal battery cover.

    Editar

  8. ZTE Blade Spark Rear-Facing Camera: passo 7, imagem 1 %32

    • You have reached the Fingerprint Scanner, the device Battery, and Front Facing Camera.

    Editar

  9. ZTE Blade Spark Rear-Facing Camera: passo 8, imagem 1 %32 ZTE Blade Spark Rear-Facing Camera: passo 8, imagem 2 %32 ZTE Blade Spark Rear-Facing Camera: passo 8, imagem 3 %32

    • Proceeding with disassembly, next up is the top chipset which the Rear Facing Camera is attached to.

    • To detach the chipset and reach the Rear Camera, locate and disconnect five power connectors surrounding the top chipset (as shown in images).

    Editar

  10. ZTE Blade Spark Rear-Facing Camera: passo 9, imagem 1 %32

    • Once you have the power connectors disconnected from the top chipset, use a Phillips screwdriver to remove the final screw located at the very top of the chipset (as shown in image).

    Editar

  11. ZTE Blade Spark Rear-Facing Camera: passo 10, imagem 1 %32

    • Then, simply lift chipset from top and detach from the device frame.

    Editar

  12. ZTE Blade Spark Rear-Facing Camera: passo 11, imagem 1 %32

    • You have now reached the final replacement component of the device, the Rear Facing Camera!

    • For step-by-step instructions on replacing any of the device components covered throughout the disassembly process, check out our ZTE Blade Spark Replacement guides.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 4 outros contribuidores

Hung Vu

Membro desde: 01/24/18

632 Reputação

Autoria de 1 guia

Emblemas: 7

+4 outros emblemas

Equipe

Gateway, Team S1-G6, Johnson Spring 2018 Membro de Gateway, Team S1-G6, Johnson Spring 2018

GCC-JOHNSON-S18S1G6

Membros da 2

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 17

Duração total: 2,246