Conserte seus objetos Comunidade Loja

ZTE Blade Spark Battery Replacement

Introdução

This guide goes through how to safely disassemble the ZTE Blade Spark and replace the battery. This device contains electrical components, and the repair should be preformed in a dry environment. Replacing your battery is easy and a great way to give your device a fresh start.

O que você precisa

  1. ZTE Blade Spark Battery Replacement, Battery: passo 1, imagem 1 %32

    • Apply heat evenly on the back cover using the iOpener to soften the adhesive.

    Editar

  2. ZTE Blade Spark Battery Replacement: passo 2, imagem 1 %32 ZTE Blade Spark Battery Replacement: passo 2, imagem 2 %32

    • Carefully remove the back cover using an opening tool.

    Editar

  3. ZTE Blade Spark Battery Replacement: passo 3, imagem 1 %32

    • Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.

    • Gently remove the SIM card tray.

    Editar

  4. ZTE Blade Spark Battery Replacement: passo 4, imagem 1 %32

    • To remove the inner white panel/cover, use a plastic opening tool to loosen from each side.

    Editar

  6. ZTE Blade Spark Battery Replacement: passo 5, imagem 1 %32

    • Set the inner white panel to the side.

    Editar

  7. ZTE Blade Spark Battery Replacement: passo 6, imagem 1 %32

    • After removing the inner white panel you should see a black panel. Use a Phillips #00 screwdriver to remove the six 4.0 mm screws.

    Editar

  8. ZTE Blade Spark Battery Replacement: passo 7, imagem 1 %32

    • Remove the black panel, revealing the battery.

    Editar

  9. ZTE Blade Spark Battery Replacement: passo 8, imagem 1 %32

    • Disconnect the tab connecting the battery to the circuit.

    Editar

  10. ZTE Blade Spark Battery Replacement: passo 9, imagem 1 %32

    • Remove the battery from the device.

    Editar

  11. ZTE Blade Spark Battery Replacement: passo 10, imagem 1 %32

    • Place battery off to the side and retrieve new battery.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Andrew Bliss

Membro desde: 03/27/23

181 Reputação

Autoria de 1 guia

Emblemas: 2

Equipe

IUPUI, Team 1-3, Harley Spring 2023 Membro de IUPUI, Team 1-3, Harley Spring 2023

IUPUI-HARLEY-S23S1G3

Membros da 3

Autoria de 3 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 6

Últimos 30 dias: 10

Duração total: 129