Skip to main content

Parts

No parts specified.

  1. Using a spudger, remove the back panel of the phone.
    • Using a spudger, remove the back panel of the phone.

  2. Remove the battery and SD card from the phone. Remove the battery and SD card from the phone.
    • Remove the battery and SD card from the phone.

  3. Remove the five 4mm Philips #00 screws, circled in red, holding the the back down.
    • Remove the five 4mm Philips #00 screws, circled in red, holding the the back down.

  4. Remove the back piece, exposing the motherboard.
    • Remove the back piece, exposing the motherboard.

  5. Flip up the three small tan clips holding the ribbons in place. Flip up the three small tan clips holding the ribbons in place. Flip up the three small tan clips holding the ribbons in place.
    • Flip up the three small tan clips holding the ribbons in place.

  6. Gently slide each of the three ribbons out of the motherboard.
    • Gently slide each of the three ribbons out of the motherboard.

  7. Slide the motherboard off of the ribbons detaching it from the front of the phone.
    • Slide the motherboard off of the ribbons detaching it from the front of the phone.

    Excelente gráfica,gran aporte

    Juan - Responder

    I have a ZTE Blade C370 in the workshop to change the LCD, I would like to be able to contribute some material. There is a tutorial where I can see what I need to be able to contribute. For example, the quality of the images and their descriptions.

    Alvaro Gomes - Responder

Conclusion

To reassemble your device, follow these instructions in reverse order.

9 other people completed this guide.

Lilia Johnson

Member since: 08/10/2014

781 Reputation

2 Guides authored

Team

USF Tampa, Team 9-5, Leahy Fall 2014 Member of USF Tampa, Team 9-5, Leahy Fall 2014

USFT-LEAHY-F14S9G5

3 Members

10 Guides authored

One Comment

Zte blade a506 insert sim card problem

Ali Jaffar - Responder

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 7

All Time: 3,861