Ir para o conteúdo principal

Peças

Nenhum componente especificado.

  1. Using a spudger, remove the back panel of the phone.
    • Using a spudger, remove the back panel of the phone.

  2. Remove the battery and SD card from the phone. Remove the battery and SD card from the phone.
    • Remove the battery and SD card from the phone.

  3. Remove the five 4mm Philips #00 screws, circled in red, holding the the back down.
    • Remove the five 4mm Philips #00 screws, circled in red, holding the the back down.

  4. Remove the back piece, exposing the motherboard.
    • Remove the back piece, exposing the motherboard.

  5. Flip up the three small tan clips holding the ribbons in place. Flip up the three small tan clips holding the ribbons in place. Flip up the three small tan clips holding the ribbons in place.
    • Flip up the three small tan clips holding the ribbons in place.

  6. Gently slide each of the three ribbons out of the motherboard.
    • Gently slide each of the three ribbons out of the motherboard.

  7. Slide the motherboard off of the ribbons detaching it from the front of the phone.
    • Slide the motherboard off of the ribbons detaching it from the front of the phone.

Conclusão

To reassemble your device, follow these instructions in reverse order.

8 outras pessoas concluíram este guia.

Lilia Johnson

Membro desde: 08/10/2014

757 Reputação

2 Guias de autoria

Equipe

USF Tampa, Team 9-5, Leahy Fall 2014 Membro de USF Tampa, Team 9-5, Leahy Fall 2014

USFT-LEAHY-F14S9G5

3 Membros

10 Guias de autoria

Um comentário

Zte blade a506 insert sim card problem

Ali Jaffar - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 7

Duração total: 3,830