Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Yuneec Typhoon H Spring Clip Replacement

O que você precisa

  1. Yuneec Typhoon H Spring Clip  Replacement, Spring Clip: passo 1, imagem 1 %32 Yuneec Typhoon H Spring Clip  Replacement, Spring Clip: passo 1, imagem 2 %32 Yuneec Typhoon H Spring Clip  Replacement, Spring Clip: passo 1, imagem 3 %32
    • Using a JIS #00 screwdriver, unscrew the 3mm oval screw.

    • The oval screw is hard to remove once fully unscrewed, to remove the screw flip the drone upside down to have the screw fall out.

  2. Yuneec Typhoon H Spring Clip  Replacement: passo 2, imagem 1 %32 Yuneec Typhoon H Spring Clip  Replacement: passo 2, imagem 2 %32
    • For this step the arm must be bent.

    • Remove the broken arm clip by pinching the metal top and then pull it out with an upward force.

    • The Blunt Nose Tweezers may be helpful in removing the arm clip.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Claire Luce

Membro desde: 04/16/18

371 Reputação

Autoria de 2 guias

Equipe

Cal Poly, Team S22-G3, Maness Spring 2018 Membro de Cal Poly, Team S22-G3, Maness Spring 2018

CPSU-MANESS-S18S22G3

Membros da 4

Autoria de 5 guias

Um comentário

what function does the little screw have?

Ruud - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 8

Duração total: 1,074