Introdução

This guide instructs you to replace the LED lights on your Yuneec Typhoon H drone. The LED lights are important for tracking where your drone is, when flying within line of sight and for other pilots to know where your drone is in the sky.

Peças

Não são necessárias peças.

This guide begins with the propeller already removed.
  • This guide begins with the propeller already removed.

Adicionar comentário

Turn the drone upside down to have easy access to the prop arm. Twist out the prop motor clockwise.
  • Turn the drone upside down to have easy access to the prop arm.

  • Twist out the prop motor clockwise.

Adicionar comentário

Unscrew two 4.9mm screws on the board using a Phillips #000 screwdriver.
  • Unscrew two 4.9mm screws on the board using a Phillips #000 screwdriver.

Adicionar comentário

Hold the LED board in one hand and  pinch the plug at the connection to the board with the other hand. Pull the plug out from the connection piece.
  • Hold the LED board in one hand and pinch the plug at the connection to the board with the other hand.

  • Pull the plug out from the connection piece.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Claire Luce

Member since: 16-04-2018

323 reputação

2 Guides authored

Equipe

Cal Poly, Team S22-G3, Maness Spring 2018 Membro de Cal Poly, Team S22-G3, Maness Spring 2018

CPSU-MANESS-S18S22G3

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 13

Todo: 43