Ir para o conteúdo principal

Introdução

This guide will demonstrate how to put the camera apparatus back together on a Yuneec Typhoon H, if it has come apart.

Ferramentas

Peças

Nenhum componente especificado.

  1. Yuneec Typhoon H Gimbal Bushing Reattachment, Gimbal Bushing Connectors to Camera Mount: passo 1, imagem 1 %32 Yuneec Typhoon H Gimbal Bushing Reattachment, Gimbal Bushing Connectors to Camera Mount: passo 1, imagem 2 %32
    • In order to repair the camera and camera gimbal, remove the camera configuration from the body of the drone.

    • Pull up on the tab connected to the camera configuration and slide the entire apparatus off.

  2. Yuneec Typhoon H Gimbal Bushing Reattachment: passo 2, imagem 1 %32 Yuneec Typhoon H Gimbal Bushing Reattachment: passo 2, imagem 2 %32 Yuneec Typhoon H Gimbal Bushing Reattachment: passo 2, imagem 3 %32
    • Put the gimbal bushings (the rubber balls) back into the plastic alignment mounts.

    • The circle that is separated from the main body of the bushing should then be inserted into the hole.

    • When pushing these bushings back into place, it is smart to use a skinny tool or toothpick.

Conclusão

To reassemble your device, simply slide the camera mount back onto the bottom of the drone.

2 outras pessoas concluíram este guia.

Jake Breul

Membro desde: 16/04/2018

127 Reputação

Autoria de 1 guia

Equipe

Cal Poly, Team S22-G3, Maness Spring 2018 Membro de Cal Poly, Team S22-G3, Maness Spring 2018

CPSU-MANESS-S18S22G3

4 Membros

5 Guias de autoria

3 comentários

Camera not getting power after crash.

Don - Responder

Crashed drone and camera not getting power anymore. Nothing appears to be broken.

Don - Responder

Did steps. Bushings ok. Camera still won't communicate.

vickiesamus - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 15

Duração total: 1,318