Introdução

This guide will demonstrate how to put the camera apparatus back together on a Yuneec Typhoon H, if it has come apart.

In order to repair the camera and camera gimbal, remove the camera configuration from the body of the drone. Pull up on the tab connected to the camera configuration and slide the entire apparatus off.
  • In order to repair the camera and camera gimbal, remove the camera configuration from the body of the drone.

  • Pull up on the tab connected to the camera configuration and slide the entire apparatus off.

Adicionar comentário

Put the gimbal bushings (the  rubber balls) back into the plastic alignment mounts. The circle that is separated from the main body of the bushing should then be inserted into the hole. When pushing these bushings back into place, it is smart to use a skinny tool or toothpick.
  • Put the gimbal bushings (the rubber balls) back into the plastic alignment mounts.

  • The circle that is separated from the main body of the bushing should then be inserted into the hole.

  • When pushing these bushings back into place, it is smart to use a skinny tool or toothpick.

Adicionar comentário

Conclusão

To reassemble your device, simply slide the camera mount back onto the bottom of the drone.

Uma outra pessoa concluiu este guia.

Jake Breul

Member since: 16-04-2018

109 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team S22-G3, Maness Spring 2018 Membro de Cal Poly, Team S22-G3, Maness Spring 2018

CPSU-MANESS-S18S22G3

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 12

Últimos 30 dias: 52

Todo: 93