Introdução

This guide will show you how to open the XtremeMac Luna so that its inner components are easily accessible.

Peças

Não são necessárias peças.

Flip the device over so that the batteries are closest to you. Remove the battery lid by pressing the battery cover's tab and pulling it away from the device. Push the battery against the spring and lift it out of the casing.
  • Flip the device over so that the batteries are closest to you.

  • Remove the battery lid by pressing the battery cover's tab and pulling it away from the device.

  • Push the battery against the spring and lift it out of the casing.

  • Repeat with the other battery.

Adicionar comentário

Unscrew all eight 12mm Phillips head screws with a Philips #1 screwdriver.
  • Unscrew all eight 12mm Phillips head screws with a Philips #1 screwdriver.

  • The iFixit 26 bit screwdriver kit will not reach the screws. Make sure to use a screwdriver that is thin enough to not get stuck in the screw holes.

Adicionar comentário

Flip the Luna back over so that the buttons are facing upward and the LCD screen is facing you. Gently tilt the lid back 45 degrees so that the inside is exposed.
  • Flip the Luna back over so that the buttons are facing upward and the LCD screen is facing you.

  • Gently tilt the lid back 45 degrees so that the inside is exposed.

  • Be mindful of the wires inside of the Luna. It is easy to break a connection if a wire gets caught.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Daniel Johnson

Member since: 14-04-2013

1 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 3-47, Amido Spring 2013 Membro de Cal Poly, Team 3-47, Amido Spring 2013

CPSU-AMIDO-S13S3G47

4 Membros

8 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 192