Introdução

Use this guide to replace the speaker in your Xiaomi Air 12.

Peças

Não são necessárias peças.

Orient the computer so the Xiaomi logo is at the bottom of the device.
  • Orient the computer so the Xiaomi logo is at the bottom of the device.

Adicionar comentário

Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw. Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw. Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.
  • Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.

Adicionar comentário

Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise. Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise.
  • Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise.

Adicionar comentário

Insert the plastic opening tool into each side of the computer and push the tool downwards to pop open the back cover. You will hear popping noises as you remove the cover. You will hear popping noises as you remove the cover.
  • Insert the plastic opening tool into each side of the computer and push the tool downwards to pop open the back cover.

  • You will hear popping noises as you remove the cover.

Adicionar comentário

Remove the back of the laptop by gently lifting the casing upwards. Remove the back of the laptop by gently lifting the casing upwards.
  • Remove the back of the laptop by gently lifting the casing upwards.

Adicionar comentário

Remove the white and black speaker wires from the black tabs by pulling upwards from the device. Remove the white and black speaker wires from the black tabs by pulling upwards from the device.
  • Remove the white and black speaker wires from the black tabs by pulling upwards from the device.

Adicionar comentário

Gently pull the speaker connector out  from the connection point using your hand. Gently pull the speaker connector out  from the connection point using your hand.
  • Gently pull the speaker connector out from the connection point using your hand.

Adicionar comentário

Remove the left speaker module by pulling the panel up from the device. Repeat the same process for the right speaker module. Left and Right speaker modules are denoted by an "L" and "R" respectively.
  • Remove the left speaker module by pulling the panel up from the device.

  • Repeat the same process for the right speaker module.

  • Left and Right speaker modules are denoted by an "L" and "R" respectively.

  • There will be a slight adhesive underneath the module.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Hannah Kwan

Member since: 18-04-2018

653 reputação

5 Guides authored

Equipe

Cal Poly, Team S18-G4, Livingston Spring 2018 Membro de Cal Poly, Team S18-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G4

4 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 9

Todo: 68