Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement

O que você precisa

  1. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement, Bumper: passo 1, imagem 1 %32
    • Remove the battery cover.

    • Remove batteries.

  2. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 2, imagem 1 %32 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 2, imagem 2 %32 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 2, imagem 3 %32
    • Grip the controller firmly to remove the side handle cover.

    • Use a flathead screwdriver or a spudger to wedge between the seams of the front to the side handle of the controller.

    • Move the flathead screwdriver all the way around the side plates seam and push the plate forward.

  3. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 3, imagem 1 %32 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 3, imagem 2 %32
    • Use a screwdriver and punch a hole directly in the center label. There you will find a hidden screw.

    • Remove the five 10mm screws located on the back of the controller using a T8 screwdriver.

  4. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 4, imagem 1 %32 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 4, imagem 2 %32
    • Remove the backplate.

  5. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 5, imagem 1 %32 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 5, imagem 2 %32
    • Remove the faceplate.

  6. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 6, imagem 1 %32 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 6, imagem 2 %32 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 6, imagem 3 %32
    • Remove the cover piece surrounding the Xbox button off of its pegs.

    • Firmly hold controller and push cover piece up from the pegs.

    • Press the Xbox button down to assist in the unclipping of the piece.

  7. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 7, imagem 1 %32 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 7, imagem 2 %32
    • Remove the broken bumper by unclipping it from its pegs.

    • Hold the controller firmly and push the bumper piece up from its pegs to unclip.

  8. Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 8, imagem 1 %32 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 8, imagem 2 %32 Xbox One Wireless Controller Model 1537 (Left) Bumper Replacement: passo 8, imagem 3 %32
    • Align the replacement bumper onto the pegs, push gently and click into place.

Conclusão

To reassemble your device, follow these instructions in reverse order.

19 outras pessoas executaram este guia.

2 comentários

On my controller the screws were T8 security type, so you'll need bits with a hole in the middle

Sean H - Responder

Is there a way to do this without removing all of the front and grip.

Alan Marantos - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 18

Últimos 7 dias: 151

Últimos 30 dias: 741

Duração total: 46,566