Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Xbox One Wireless Controller Faceplate Replacement

O que você precisa

  1. Xbox One Wireless Controller Faceplate Replacement, Battery Pack: passo 1, imagem 1 %32
    • Remove the battery pack cover.

    • Remove batteries.

  2. Xbox One Wireless Controller Faceplate Replacement, Side Handles: passo 2, imagem 1 %32 Xbox One Wireless Controller Faceplate Replacement, Side Handles: passo 2, imagem 2 %32
    • We recommend using a nylon spudger for this step. A metal spudger is shown.

    • Grip the controller firmly to remove the side handles, wedging a spudger into the seam between the front and handle plates.

    • Pry the side plate away from the front plate by moving the spudger back and forth. You will need to do this all the way around the side plate's seam.

    Start prying the side plate off underneath the trigger, this makes it easier to disconnect the other clips connecting the side plate to the backplate.

    Brandon - Responder

    One you take it off, is it possible to click it back in?

    Aiden Bear - Responder

    As long as you don’t exceed the couple tons you need to take it off you should be able to put it back.

    Brandon -

    getting those handles back on seems impossible, they just dont fit as well, a gap remains even after snapping into place.

    Dont think ill be doing this in the future

    Spoutin Wyze - Responder

    edit: wiggled the bo9ttom middlewith the handles off and somethign finally “clicked” into place for that extra 1/4 mm for the down arrow on my D-Pad to click back up into place!.

    Spoutin Wyze - Responder

  3. Xbox One Wireless Controller Faceplate Replacement, Screws: passo 3, imagem 1 %32 Xbox One Wireless Controller Faceplate Replacement, Screws: passo 3, imagem 2 %32
    • There is a hidden screw located in the middle of the controller behind the label.

    • Use a screwdriver and punch a hole directly in the center of the label.

    • You may also lift the label if you do not want to puncture it.

    • Remove the five 10mm screws located on the back of the controller using the T8 Security Torx Screwdriver.

    i damaged my screws. how do i get the screws out?

    tenzin - Responder

    wait. i just watched a video guide on ifixit's youtube channel about damaged screws. i'll try those methods.

    tenzin - Responder

    It's a t8 or t9 security bit btw, I got the top two out with a regular T8, but the bottom two and middle needed a T9 Security bit.

    David Loper - Responder

    All five faceplate/backplate screws in the controller I disassembled were T8 security fasteners.

    John Dziedzic - Responder

    Am I doing something wrong because I got the tool it said I needed and got the middle screw out but the others have a bump or something in the center of the screw and it won't fit.

    kolton77 - Responder

    The T8 is only good for the middle screw on my One S controller. The others require something bigger

    Matej Skelo - Responder

    These requires SECURITY Torx bits (they have a cannulated hole in the driver). I don't believe the iFixIt branded driver is cannulated but you can buy a set of bits from DeWalt DWAX200 which is overkill but has what you need.

    jhighsmith - Responder

    The driver that iFixIt sells is cannulated.

    jhighsmith -

    where do you get this dumb ass screw driver

    Jake Zweier - Responder

    iFixit Store #IF145-027-3

    VauWeh - Responder

    You can bypass it with a 1.5mm flathead.

    Marianne Sandling - Responder

    thank you for this. worked for me

    Mr Anderson (Evolluisionist) -

    These screws required a T10, not T8.

    Armand - Responder

    TR9. A $10 kit from Walmart has the bit/driver in it and extra goodies to make life simple.

    Matt Martin - Responder

    As weird as it sounds, the top 2 came out for me with a flathead- but the bottom two and the middle one wont

    macybrooksevans - Responder

    If you damage the middle part of the screws you can still take it out with the same screwdriver.

    Kev God - Responder

    needed a T8H, not easy to see.

    on a grey green xbox one controller

    Michael - Responder

    On my 1708 controller there are two internal screws near the rumble motors that need to be removed with a T6 non security bit to remove the back cover.

    teeedubb - Responder

  4. Xbox One Wireless Controller Faceplate Replacement, Backplate: passo 4, imagem 1 %32
    • Remove the backplate.

  5. Xbox One Wireless Controller Faceplate Replacement, Faceplate: passo 5, imagem 1 %32
    • Remove the faceplate.

Conclusão

To reassemble your device, follow these instructions in reverse order.

87 outras pessoas executaram este guia.

Tommy

Membro desde: 01/22/15

1.909 Reputação

Autoria de 2 guias

Equipe

Cal Poly, Team 20-15, Maness Winter 2015 Membro de Cal Poly, Team 20-15, Maness Winter 2015

CPSU-MANESS-W15S20G15

Membros da 5

Autoria de 50 guias

11 comentários

It was a good tutorial, but i have two plastic rings that stay after my instervention... Anyone knows where are-they ?

Matis Begot - Responder

It was a good tutorial, but i have two plastic rings that stay after my instervention... Anyone knows where are-they ?


laurito andrea12 -

Note before starting. You need a T8 security bit (with a hole in the middle), not a standard T8 bit.

Fraser Currie - Responder

I took mine a part because it was looking dirty, gave it a good clean, putting it back together was easy but it wont work with the batteries anymore just the power core, there is nothing broken or cracked, any ideas?

Lee - Responder

Maybe you forced the battery contact on the wrong side of the case?

Alexandre Foley -

Alex is probably right. It's easy to let the two battery contacts on one side get covered by the bottom plate. Take battery cover off and compare the metal bits you see to a known good one.

Brandon Reiser -

Are the steps the same with the Xbox One Elite Controller as well?

Zac Dubits - Responder

This is a great tutorial for people wanting to replace the boring black or white faceplate with one with a skin. It’s a shame they didn’t make the controllers easily customizable. They could’ve done a lot more with this console.

Liam Melkix - Responder

Is this for the standard Xbox One controller or the Xbox One S Controller, or does the same exact steps apply to both?

Aaron Strain - Responder

RB wasn't making contact unless I pushed really hard. Destructed as shown then pulled off the xbox button faceplate, and the offending button. Cleaned around the tact switch with isopropyl and it's responsive again!

Jeb Beard - Responder

I did this only using a glasses repair kit

William Canu - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 19

Últimos 7 dias: 211

Últimos 30 dias: 935

Duração total: 236,560