Conserte seus objetos Comunidade Loja

Xbox One Elite Controller (Model 1698) Daughterboard Replacement

O que você precisa

  1. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Show me the Screws!: passo 1, imagem 1 %32 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Show me the Screws!: passo 1, imagem 2 %32

    • You can remove the side panels with a pry tool.

    • You don't need to remove the rubber. The rubber on this controller was already bad

    Editar

  2. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Removing the back panel screws: passo 2, imagem 1 %32

    • Remove the 5 Torx Security Bit (TR9) screws

    Editar

  3. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: passo 3, imagem 1 %32 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: passo 3, imagem 2 %32 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: passo 3, imagem 3 %32

    • Pry the panel next to the 3.5mm port

    • Be careful to not rip the ribbon shown in the next step

    Editar

  5. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Warning Carefully remove the ribbon: passo 4, imagem 1 %32 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Warning Carefully remove the ribbon: passo 4, imagem 2 %32

    • Be careful to not rip the ribbon cable

    • You can pop the connector up to remove the ribbon easily

    • Ribbon Cable

    Editar

  6. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Screws on controller motherboard: passo 5, imagem 1 %32

    • Remove the 2 Torx (T6) screws

    Editar

  7. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Desolder wires from motherboard: passo 6, imagem 1 %32 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Desolder wires from motherboard: passo 6, imagem 2 %32

    • Desolder the 4 wires on each side, these control the vibrations and the RT LT

    Editar

  8. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the motherboard: passo 7, imagem 1 %32 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the motherboard: passo 7, imagem 2 %32

    • Pull up from the "top" side of the controller on the sister board.

    Editar

  9. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: passo 8, imagem 1 %32 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: passo 8, imagem 2 %32 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: passo 8, imagem 3 %32

    • Be Careful to not lose the sync button

    • Pry the middle section up from the home button side.

    • This will also remove the LB and RB which is a single part

    Editar

  10. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the controller daughterboard: passo 9, imagem 1 %32 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the controller daughterboard: passo 9, imagem 2 %32

    • Unscrew the 6 Torx (T6) screws

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

EasyAsABC123

Membro desde: 01/22/10

2.407 Reputação

Autoria de 5 guias

Emblemas: 25

+22 outros emblemas

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 29

Últimos 30 dias: 75

Duração total: 8,263