Ir para o conteúdo principal

Introdução

Before proceeding, make sure you have all the necessary parts and tools for this replacement guide. This is over the replacement of the speaker for XTreme Tablet Generation 2. Use safety glasses and gloves when applicable.

Peças

Nenhum componente especificado.

  1. Using a spudger and pry tool, remove the back cover. Start at the top corner, and carefully pry the back cover off of the main body.
    • Using a spudger and pry tool, remove the back cover. Start at the top corner, and carefully pry the back cover off of the main body.

    • Continue around the device, being careful to not dislodge the power button.

  2. Using a solder vacuum and soldering iron, release the red wire from the motherboard first, then release the black wire. The speaker is held on the back cover with adhesive tape. Using a pry tool, carefully pry the speaker from the back cover.
    • Using a solder vacuum and soldering iron, release the red wire from the motherboard first, then release the black wire.

    • The speaker is held on the back cover with adhesive tape. Using a pry tool, carefully pry the speaker from the back cover.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Kristen John

Membro desde: 26/01/2015

125 Reputação

Autoria de 1 guia

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 292