Wyze WVCR200s Side Brush Replacement

Introdução

This guide demonstrates how to replace the side brush on your Wyze WVCR200s robot vacuum. The side brush is a commonly replaced part of the vacuum. The manufacturers of the product should provide an extra side brush in the packaging.

Passo 1 Side Brush

Wyze WVCR200s Side Brush Replacement, Side Brush: passo 1, imagem 1 %32

Flip the vacuum upside down so the underside of the device is facing up.
On the upper left of the device, you should see a spinning brush with three arms protruding out. This is the side brush.

Editar

Passo 2

To remove, grab the three arms of the brush and pull upwards. The arms should be tight, but should not require too much force to lift off.
Once the brush is off, a square peg that holds the brush should be visible.
Place the replacement brush on the square peg, and press down with moderate pressure.