Introdução

If your selector bezel is cracked or broken and you would like to replace it, follow these steps.

Pull the variable speed control knob from the front of the blender.
  • Pull the variable speed control knob from the front of the blender.

Adicionar comentário

Using a Phillips #1 screwdriver to remove the three 3/8" screws holding the selector bezel in place. Using a Phillips #1 screwdriver to remove the three 3/8" screws holding the selector bezel in place.
  • Using a Phillips #1 screwdriver to remove the three 3/8" screws holding the selector bezel in place.

Adicionar comentário

Pull the bezel from the base of the blender. Pull the bezel from the base of the blender.
  • Pull the bezel from the base of the blender.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Luke Kutz

Member since: 19-04-2018

339 reputação

3 Guides authored

Equipe

Cal Poly, Team S25-G16, Maness Spring 2018 Membro de Cal Poly, Team S25-G16, Maness Spring 2018

CPSU-MANESS-S18S25G16

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 41