Introdução

If your blender is not chopping food correctly, consider replacing the blades. The blades can be very sharp, so please take caution when proceeding with this guide.

  1. Flip over the pitcher to expose the base of the blade assembly.
    • Flip over the pitcher to expose the base of the blade assembly.

    • Using the H4.0 Allen key from the 54 bit driver kit, attached to an impact driver, remove the socket head cap screw from the drive coupling.

    • Apply a solvent to remove adhesive if necessary.

    Adicionar comentário

  2. Using a pair of pliers, pull of the drive shaft coupling.
    • Using a pair of pliers, pull of the drive shaft coupling.

    Adicionar comentário

    • Using a flat head screwdriver and a mallet, bend down the two tabs holding the large nut.

    Adicionar comentário

    • Remove the nut using a crescent wrench.

    Adicionar comentário

    • Push the blade assembly into the jar.

    • Remove the blades from the device.

    • Be careful not to cut yourself when handling the blades.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Luke Kutz

Member since: 19-04-2018

342 reputação

3 Guides authored

Equipe

Cal Poly, Team S25-G16, Maness Spring 2018 Membro de Cal Poly, Team S25-G16, Maness Spring 2018

CPSU-MANESS-S18S25G16

4 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 99