Introdução

Use this guide to replace the outer case on your Nintendo Wii U GamePad.

Peças

Não são necessárias peças.

  1. Face the GamePad down and unscrew the two Phillips #00 screws which are attached to the battery cover.
    • Face the GamePad down and unscrew the two Phillips #00 screws which are attached to the battery cover.

    • Lift up and remove the battery cover.

    Adicionar comentário

  2. With your finger on the battery connector, pull downwards toward the base of the GamePad to disconnect it.
    • With your finger on the battery connector, pull downwards toward the base of the GamePad to disconnect it.

    • Pull upwards from the bottom of the battery to release it.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the ten 8.9mm Tri-wing Y1 screws hidden underneath square stickers.

    • Lift up the back plate.

    • The back plate is still connected by a cable to the motherboard.

    how do i replace the whole front and back casing?

    enbodylin - Responder

    • Unplug the connector that connects the back plate to the motherboard.

    • Remove the back plate.

    You don't have to remove just be careful

    Heather Sheppard - Responder

Conclusão

To reassemble your device, follow these instructions in reverse order.

8 outras pessoas concluíram este guia.

Kim Arre

Member since: 11-01-2013

3.174 reputação

8 Guides authored

Equipe

iFixit Membro de iFixit

Community

111 Membros

7.315 Guides authored

This is either incomplete or mistitled - it is a currently a back plate replacement guide.

At the conclusion of this how-to/walkthrough, most of the GamePad's hardware is still attached to the front plate, one half of the outer case.

Elijah - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 9

Últimos 30 dias: 67

Todo: 9,257