Conserte seus objetos Comunidade Loja

Westcott iPoint Evolution Outer Casing Replacement

Introdução

In this guide, you will learn how to remove the outer casing of the Westcott iPoint Evolution pencil sharpener. Use this guide to replace the casing or to access the sharpener's internal components.

O que você precisa

  1. Westcott iPoint Evolution Outer Casing Replacement, Outer Casing: passo 1, imagem 1 %32

    • Step 1: Start with the back of the pencil sharpener facing you.

    • This allows you to locate the power source.

    Editar

  2. Westcott iPoint Evolution Outer Casing Replacement: passo 2, imagem 1 %32

    • Step 2: Grab the end of the plug located at the bottom of the sharpener and pull it out gently.

    Editar

  3. Westcott iPoint Evolution Outer Casing Replacement: passo 3, imagem 1 %32 Westcott iPoint Evolution Outer Casing Replacement: passo 3, imagem 2 %32

    • There are three parts of the sharpener.

    • Step 3: Grab the very top of the sharpener, twist it to the right and lift it up to remove it.

    Editar

  5. Westcott iPoint Evolution Outer Casing Replacement: passo 4, imagem 1 %32 Westcott iPoint Evolution Outer Casing Replacement: passo 4, imagem 2 %32 Westcott iPoint Evolution Outer Casing Replacement: passo 4, imagem 3 %32

    • Step 4: Grab the center of the sharpener and lift it up to remove the piece.

    Editar

  6. Westcott iPoint Evolution Outer Casing Replacement: passo 5, imagem 1 %32 Westcott iPoint Evolution Outer Casing Replacement: passo 5, imagem 2 %32 Westcott iPoint Evolution Outer Casing Replacement: passo 5, imagem 3 %32

    • Step 5: Remove the small ring that is around the sharpener.

    • This piece is below the center of the sharpener that you just removed.

    Editar

  7. Westcott iPoint Evolution Outer Casing Replacement: passo 6, imagem 1 %32

    • Step 6: Flip the pencil sharpener upside down.

    • Locate the four screws on the bottom of the sharpener.

    Editar

  8. Westcott iPoint Evolution Outer Casing Replacement: passo 7, imagem 1 %32

    • Step 7: Take a screwdriver and unscrew all of the screws on the bottom.

    Editar

  9. Westcott iPoint Evolution Outer Casing Replacement: passo 8, imagem 1 %32

    • Step 8: After all the screws are removed gently take off the bottom of the sharpener.

    Editar

  10. Westcott iPoint Evolution Outer Casing Replacement: passo 9, imagem 1 %32

    • Step 9: Carefully lift the lid off of the sharpener.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 9

Últimos 30 dias: 44

Duração total: 11,716