Ir para o conteúdo principal

Wen 2307 Speed Adjustment Assembly Replacement

O que você precisa

  1. Wen 2307 Speed Adjustment Assembly Replacement, Front Panel: passo 1, imagem 1 %32
    • Unscrew the locking sleeve.

  2. Wen 2307 Speed Adjustment Assembly Replacement: passo 2, imagem 1 %32
    • Remove the hanging clip.

  3. Wen 2307 Speed Adjustment Assembly Replacement: passo 3, imagem 1 %32 Wen 2307 Speed Adjustment Assembly Replacement: passo 3, imagem 2 %32
    • Unscrew the six 8mm PH2 screws.

  4. Wen 2307 Speed Adjustment Assembly Replacement: passo 4, imagem 1 %32
    • While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.

  5. Wen 2307 Speed Adjustment Assembly Replacement: passo 5, imagem 1 %32
    • To remove the front panel, pry the device apart while holding the device with the other hand.

    • The front panel should come out easily.

  6. Wen 2307 Speed Adjustment Assembly Replacement, Power Cable: passo 6, imagem 1 %32 Wen 2307 Speed Adjustment Assembly Replacement, Power Cable: passo 6, imagem 2 %32
    • Identify the screws.

    • Unscrew the two 3mm phillips PH2.

    • Don't forget to put them appart from the ones unscrewed before.

    • Don't forget to put them appart from the ones unscrewed before.

    • Phillips PH2

    • Flathead 2.5mm

  7. Wen 2307 Speed Adjustment Assembly Replacement: passo 7, imagem 1 %32
    • Remove the place boar carefully.

  8. Wen 2307 Speed Adjustment Assembly Replacement: passo 8, imagem 1 %32
    • Pull out the power cable connectors.

  9. Wen 2307 Speed Adjustment Assembly Replacement: passo 9, imagem 1 %32
    • Pull out the cord sleve for the new cable replacement.

  10. Wen 2307 Speed Adjustment Assembly Replacement, Speed Adjustment Assembly: passo 10, imagem 1 %32
    • Remove the connected wiring from the circuit board.

  11. Wen 2307 Speed Adjustment Assembly Replacement: passo 11, imagem 1 %32
    • Remove the single 4mm screw retaining the circuit board.

  12. Wen 2307 Speed Adjustment Assembly Replacement: passo 12, imagem 1 %32
    • Gently pry the circuit board from the back piece.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Dominick Chavez

Membro desde: 02/08/16

137 Reputação

Autoria de 1 guia

Equipe

USF Tampa, Team 12-1, Eyestone Spring 2016 Membro de USF Tampa, Team 12-1, Eyestone Spring 2016

USFT-EYESTONE-S16S12G1

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 10

Duração total: 742