Ir para o conteúdo principal

Wen 2307 Fan Replacement

O que você precisa

  1. Wen 2307 Fan Replacement, Front Panel: passo 1, imagem 1 %32
    • Unscrew the locking sleeve.

  2. Wen 2307 Fan Replacement: passo 2, imagem 1 %32
    • Remove the hanging clip.

  3. Wen 2307 Fan Replacement: passo 3, imagem 1 %32 Wen 2307 Fan Replacement: passo 3, imagem 2 %32
    • Unscrew the six 8mm PH2 screws.

  4. Wen 2307 Fan Replacement: passo 4, imagem 1 %32
    • While pressing the spindle lock button, unscrew the collet nut and remove it along with the brass collet.

  5. Wen 2307 Fan Replacement: passo 5, imagem 1 %32
    • To remove the front panel, pry the device apart while holding the device with the other hand.

    • The front panel should come out easily.

  6. Wen 2307 Fan Replacement, Speed Adjustment Assembly: passo 6, imagem 1 %32
    • Remove the connected wiring from the circuit board.

  7. Wen 2307 Fan Replacement: passo 7, imagem 1 %32
    • Remove the single 4mm screw retaining the circuit board.

  8. Wen 2307 Fan Replacement: passo 8, imagem 1 %32
    • Gently pry the circuit board from the back piece.

  9. Wen 2307 Fan Replacement, Motor: passo 9, imagem 1 %32
    • Gently pull motor assembly out of the panel.

  10. Wen 2307 Fan Replacement: passo 10, imagem 1 %32
    • Motor separates into two pieces.

  11. Wen 2307 Fan Replacement, Fan: passo 11, imagem 1 %32
    • The fan assembly is attached to the rotor beam, it can be disassembled to change the fan by simply pulling off the pieces.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Joshua Bowery

Membro desde: 02/08/16

549 Reputação

Autoria de 3 guias

Equipe

USF Tampa, Team 12-1, Eyestone Spring 2016 Membro de USF Tampa, Team 12-1, Eyestone Spring 2016

USFT-EYESTONE-S16S12G1

Membros da 4

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 9

Duração total: 487