Conserte seus objetos Comunidade Loja

Waterproof Bluetooth HEMA speaker Battery Replacement

Introdução

This guide will tell you how to replace the battery of the bluetooth speaker. It's an easy guide, however you have to solder the wires. The guide can also easily be used for replacing other parts of the speaker.

O que você precisa

  1. Waterproof Bluetooth HEMA speaker Battery Replacement, Battery: passo 1, imagem 1 %32

    • Turn the device upside down.

    Editar

  2. Waterproof Bluetooth HEMA speaker Battery Replacement: passo 2, imagem 1 %32

    • Pull off the rubber suction cup.

    Editar

  4. Waterproof Bluetooth HEMA speaker Battery Replacement: passo 3, imagem 1 %32

    • Unscrew the four 6mm round Phillips #000 head screws on the bottom of the product.

    Editar

  5. Waterproof Bluetooth HEMA speaker Battery Replacement: passo 4, imagem 1 %32 Waterproof Bluetooth HEMA speaker Battery Replacement: passo 4, imagem 2 %32

    • Remove the rear clamshell.

    • Separate the battery from the speaker by pulling gently. The foam adhesive will release.

    Editar

  6. Waterproof Bluetooth HEMA speaker Battery Replacement: passo 5, imagem 1 %32

    • Unscrew the four 4 mm round Phillips #000 screws that keep the circuit board in place.

    • Take out the circuit board.

    Editar

  7. Waterproof Bluetooth HEMA speaker Battery Replacement: passo 6, imagem 1 %32

    • Detach the battery by gently unsoldering the wires with a soldering iron. Also look at the colors of the wires,

    • Take note of the location the wires were attached and the negative and positive side.

    • Take a new 3,7V 400 mA Lithium battery and solder it to the circuit board where the old battery was attached.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 15

Duração total: 1,332