Ir para o conteúdo principal

Water Damage on main board of Nokia 206 RM873

O que você precisa

  1. Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: passo 1, imagem 1 %32 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: passo 1, imagem 2 %32 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: passo 1, imagem 3 %32
    • Remove back cover & battery.

  2. Water Damage on main board of Nokia 206 RM873: passo 2, imagem 1 %32 Water Damage on main board of Nokia 206 RM873: passo 2, imagem 2 %32
    • Remove the front case by prying it open. You will hear clicks.

    • Be careful with taking off screen if you use a spudger.

  3. Water Damage on main board of Nokia 206 RM873: passo 3, imagem 1 %32 Water Damage on main board of Nokia 206 RM873: passo 3, imagem 2 %32
    • Use a Torx screwdriver to remove the screen screws.

    • Use a spudger or tweezers to remove the connector of the LCD screen.

    Nokia 206 display and charger

    Mithilesh Yadav - Responder

  4. Water Damage on main board of Nokia 206 RM873: passo 4, imagem 1 %32 Water Damage on main board of Nokia 206 RM873: passo 4, imagem 2 %32 Water Damage on main board of Nokia 206 RM873: passo 4, imagem 3 %32
    • Remove keyboard by prying it open with a spudger.

    • The keyboard is secured with adhesive, be careful!

  5. Water Damage on main board of Nokia 206 RM873: passo 5, imagem 1 %32 Water Damage on main board of Nokia 206 RM873: passo 5, imagem 2 %32 Water Damage on main board of Nokia 206 RM873: passo 5, imagem 3 %32
    • The PCB board had water damage, see this in picture 3.

    • To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

  6. Water Damage on main board of Nokia 206 RM873: passo 6, imagem 1 %32 Water Damage on main board of Nokia 206 RM873: passo 6, imagem 2 %32
    • How and where to use the cotton swabs.

Conclusão

To reassemble your device, follow these instructions in reverse order.

16 outras pessoas executaram este guia.

Kevin D

Membro desde: 05/02/14

7.276 Reputação

Autoria de 21 guias

4 comentários

no use .it is not switching on . replaced with good batter also. no on

nabhan75 - Responder

try to clean with an ultrasonic bath.

measure out powerrail.

measure out the voltage coming in on board. try to see if you have short.

Kevin D - Responder

Nokia 206 display and charger pin

Mithilesh Yadav - Responder

Not working kiy 1.2.3 and colling ricev kiy not working

K .M Jugesh - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 26

Duração total: 10,767