Introdução

Use this guide to replace the motor of your device.

Peças

Não são necessárias peças.

Unscrew the 12 mm Phillips head screws located at the top of the cover and at the bottom two corners, using a Phillips #1 Screwdriver. Unscrew the 12 mm Phillips head screws located at the top of the cover and at the bottom two corners, using a Phillips #1 Screwdriver.
  • Unscrew the 12 mm Phillips head screws located at the top of the cover and at the bottom two corners, using a Phillips #1 Screwdriver.

Adicionar comentário

Remove the wires connected to the motor by firmly grasping both sides of a wire and wiggling until it is released. Remove the wires connected to the motor by firmly grasping both sides of a wire and wiggling until it is released. Remove the wires connected to the motor by firmly grasping both sides of a wire and wiggling until it is released.
  • Remove the wires connected to the motor by firmly grasping both sides of a wire and wiggling until it is released.

Adicionar comentário

Unscrew the two 20.5 mm Phillip head screw located on the motor using a Phillip's #1 screwdriver. Unscrew the two 20.5 mm Phillip head screw located on the motor using a Phillip's #1 screwdriver. Unscrew the two 20.5 mm Phillip head screw located on the motor using a Phillip's #1 screwdriver.
  • Unscrew the two 20.5 mm Phillip head screw located on the motor using a Phillip's #1 screwdriver.

Adicionar comentário

Gently remove the motor from the device. Gently remove the motor from the device.
  • Gently remove the motor from the device.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Sophia Swearengin

Member since: 26-09-2017

501 reputação

5 Guides authored

Equipe

USF Tampa, Team S14-G5, Boczar Fall 2017 Membro de USF Tampa, Team S14-G5, Boczar Fall 2017

USFT-BOCZAR-F17S14G5

2 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 18

Todo: 53