Vizio SmartCast Tablet Remote XR6M Micro-USB Port Replacement

Introdução

If the battery appears to be working, and the device charges normally when sitting on the charging stand, but does not charge when connected to a USB cable, you may need to replace the Micro-USB Port. Here we have included a step-by-step guide for the replacement of the Port.

O que você precisa

Passo 1 Micro-USB Port

Vizio SmartCast Tablet Remote XR6M Micro-USB Port Replacement, Micro-USB Port: passo 1, imagem 1 %32

Follow Step 1 on Battery Replacement Guide to remove the back panel of the device.

Editar

Passo 2

Insert the tip of the nylon spudger under the black flap, and pull upwards toward yourself to disconnect it.
Be careful, as the flap can easily break off.

Editar

Passo 3

Vizio SmartCast Tablet Remote XR6M Micro-USB Port Replacement: passo 3, imagem 3 %32

Using the T-5 bit, unscrew the three 5mm screws, two attached to the green board, one attached to the black board.

Editar

Passo 4

Vizio SmartCast Tablet Remote XR6M Micro-USB Port Replacement: passo 4, imagem 3 %32

Using the nylon spudger, remove the silver cylindrical component followed by the green then black components
Be careful not to break the wires that are holding the three components together.

Editar