Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

This guide provides instructions for removal of the glass lens cover on the front of the camcorder's water proof case. There are small screws and a glass part in this repair, so have a clean work space and keep the case on a flat surface to avoid losing screws or dropping the glass lens cover.

Peças

Nenhum componente especificado.

  1. Place waterproof case on flat surface, with the lens cover facing up.
    • Place waterproof case on flat surface, with the lens cover facing up.

  2. Remove the six 4.5mm Phillips #00 screws from the black lens cover trim. Remove the six 4.5mm Phillips #00 screws from the black lens cover trim.
    • Remove the six 4.5mm Phillips #00 screws from the black lens cover trim.

  3. While holding the black lens cover trim tight to the case, flip the case over so that the lens cover is rested on your work surface. While holding the black lens cover trim tight to the case, flip the case over so that the lens cover is rested on your work surface.
    • While holding the black lens cover trim tight to the case, flip the case over so that the lens cover is rested on your work surface.

  4. Apply pressure to the lens cover with your thumb, and use your other fingers to pull up on the case, separating the lens and lens trim from the case. Apply pressure to the lens cover with your thumb, and use your other fingers to pull up on the case, separating the lens and lens trim from the case.
    • Apply pressure to the lens cover with your thumb, and use your other fingers to pull up on the case, separating the lens and lens trim from the case.

  5. There is a small plastic key on the black bezel that aligns it to the case. Be sure to line this up during reassembly. There is a small plastic key on the black bezel that aligns it to the case. Be sure to line this up during reassembly.
    • There is a small plastic key on the black bezel that aligns it to the case. Be sure to line this up during reassembly.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Jordan Baum

Membro desde: 13/02/2016

349 Reputação

2 Guias de autoria

Equipe

IUPUI, Team 54-6, Wilson Spring 2016 Membro de IUPUI, Team 54-6, Wilson Spring 2016

IUPUI-WILSON-S16S54G6

3 Membros

5 Guias de autoria

Hello, do you know where I can acquire a replacement water proof case for my Vivitar DVR 787 HD action camcorder?

Andrew Hinsley - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 1,002