Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Peças

Nenhum componente especificado.

  1. Begin with the camcorder lens up on a clear working surface. Remove the two 4mm Phillips #1 screws holding the switch plate in place. Rotate the device 180 degrees and repeat for the screws on the opposite side. Remove the two 4mm Phillips #1 screws holding the switch plate in place. Rotate the device 180 degrees and repeat for the screws on the opposite side.
    • Begin with the camcorder lens up on a clear working surface.

    • Remove the two 4mm Phillips #1 screws holding the switch plate in place. Rotate the device 180 degrees and repeat for the screws on the opposite side.

  2. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Confira os kits

    Enough RAM
    For All The Tabs

    Confira os kits
  3. Slide the plastic opening tool into the seam between the front and back sections of the case and apply a small amount of force to pop the case open.
    • Slide the plastic opening tool into the seam between the front and back sections of the case and apply a small amount of force to pop the case open.

  4. Move the plastic opening tool around the seam and apply force at each step to separate the front plate from the back plate and motherboard. The battery is held to the front half of the case with double-sided tape. Peel it up with a finger, being careful not to damage the battery. The battery is held to the front half of the case with double-sided tape. Peel it up with a finger, being careful not to damage the battery.
    • Move the plastic opening tool around the seam and apply force at each step to separate the front plate from the back plate and motherboard.

    • The battery is held to the front half of the case with double-sided tape. Peel it up with a finger, being careful not to damage the battery.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jordan Baum

Membro desde: 13/02/2016

348 Reputação

2 Guias de autoria

Equipe

IUPUI, Team 54-6, Wilson Spring 2016 Membro de IUPUI, Team 54-6, Wilson Spring 2016

IUPUI-WILSON-S16S54G6

3 Membros

5 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 194