Sony Vaio VGN-FS640 Fan Replacement

Introdução

The cooling fan is essential for cooling the laptop’s internal components and is imperative for maintaining the performance and health of the laptop. A faulty or broken fan may result in overheating, leading to performance issues and permanent damage to the hard drive and other components. When cleaning the fan isn’t sufficient to solve the overheating problem, replacing the fan may be the only feasible alternative. This guide will show the user how to replace the fan in a Sony Vaio VGN-FS640 laptop.

O que você precisa

Passo 1 Backplate

Sony Vaio VGN-FS640 Fan Replacement, Backplate: passo 1, imagem 1 %32

Turn off the laptop and disconnect any charging cables.
Flip the laptop over so that the Service Tag is shown at the top left corner.

Editar

Passo 2

Remove the highlighted screws from the back of the laptop with a Phillips #0 Screwdriver.

Editar

Passo 3

Remove the highlighted screws from the panels in the bottom right-hand corner of the laptop using the Phillips #0 Screwdriver.

Editar

Passo 4

Remove the two panels in the bottom right-hand corner by sliding in the direction of the arrows imprinted on the panels.

Editar

Passo 5

Remove the highlighted screws underneath the removed panels using the Phillips #0 Screwdriver.

Editar

Passo 6

Carefully remove the hard drive from the panel in the bottom right-hand corner of the laptop.

Editar

Passo 7

Locate the battery, located on the top side of the laptop to the right of the Service Tag .
Remove the battery by pressing inwards on the tabs on either side of the battery.

Editar