VTech Kidizoom Smartwatch DX2 Master Switch Replacement - Guia de Reparo iFixit

Introdução

If your watch will not turn on there is a chance that your master switch is stuck or not functioning properly. The following guide will show you how to replace one of the most essential buttons on the Vtech Kidizoom Smart Watch DX.

O que você precisa

Passo 1 Master Switch

VTech Kidizoom Smartwatch DX2 Master Switch Replacement, Master Switch: passo 1, imagem 1 %32

VTech Kidizoom Smartwatch DX2 Master Switch Replacement, Master Switch: passo 1, imagem 2 %32

Begin by flipping the watch over with its back facing upwards.

Passo 2

VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 2, imagem 1 %32

VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 2, imagem 2 %32

Next, use the Phillips #00 screwdriver to unscrew the four 6.0 mm screws located in each corner of the watch to remove the backplate.

Passo 3

VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 3, imagem 1 %32

VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 3, imagem 2 %32

Gently lift the backplate up to remove it.

Passo 4

VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 4, imagem 1 %32

VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 4, imagem 2 %32

VTech Kidizoom Smartwatch DX2 Master Switch Replacement: passo 4, imagem 3 %32

After removing the backplate, lift the master switch up from the circuit board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Sydney

Membro desde: 10/25/18

368 Reputação

Autoria de 2 guias

+5 outros emblemas

Equipe

UMass Dartmouth, Team S3-G5, Peak Fall 2018 Membro de UMass Dartmouth, Team S3-G5, Peak Fall 2018

UMASSD-PEAK-F18S3G5

4 Membros

Autoria de 7 guias

0Comentários do guia

Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Ao todo: 2,095