Conserte seus objetos Comunidade Loja

VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement

Introdução

Use this guide to remove and replace the power distribution circuit board.

O que você precisa

  1. VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement, Front Case: passo 1, imagem 1 %32 VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement, Front Case: passo 1, imagem 2 %32

    • Remove batteries and SD card before beginning disassembly!

    • Locate the four plastic screw covers denoted by the markers and gently pry them up with the metal spudger.

    Editar

  2. VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 2, imagem 1 %32 VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 2, imagem 2 %32

    • Remove all four (11mm) screws with the Philips #0 screwdriver.

    Editar

  3. VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 3, imagem 1 %32 VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 3, imagem 2 %32 VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 3, imagem 3 %32

    • Remove the two battery cartridges located on the underside of the camera.

    • Once cartridges are removed, use the metal spudger to pry open the top, bottom, and both sides of the camera.

    Editar

  4. VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 4, imagem 1 %32

    • Beware of the two black viewfinder lens falling out as you pry open the device!

    • The device should now be open and ready for further repair and/or replacement parts.

    Editar

  6. VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement, Motherboard: passo 5, imagem 1 %32

    • Locate and remove the screws circled in the provided image with a Philips #0 screwdriver.

    Editar

  7. VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 6, imagem 1 %32 VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 6, imagem 2 %32

    • Unsolder the connection points on the motherboard.

    Editar

  8. VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 7, imagem 1 %32 VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 7, imagem 2 %32 VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 7, imagem 3 %32

    • Unsolder the connections to the right battery terminal. Removing the terminal allows easier access to the motherboard.

    Editar

  9. VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 8, imagem 1 %32 VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 8, imagem 2 %32 VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 8, imagem 3 %32

    • Carefully pull up on the motherboard and pink plastic underneath the motherboard. The pink plastic contains the display and is connected to the motherboard.

    Editar

  10. VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement, Power Distribution Circuit Board: passo 9, imagem 1 %32

    • Unsolder the wires connected to the power distribution circuit board.

    Editar

  11. VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 10, imagem 1 %32

    • Locate and remove the two screws that hold in the power distribution circuit board using a Philips #0 screwdriver.

    Editar

  12. VTech Kidizoom Camera Connect Power Distribution Circuit Board Replacement: passo 11, imagem 1 %32

    • Gently pull up on power distribution circuit board and remove it from the device.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 1 outro contribuidor

Justin Sanchez

Membro desde: 02/08/16

520 Reputação

Autoria de 4 guias

Emblemas: 11

+8 outros emblemas

Equipe

USF Tampa, Team 6-4, Eyestone Spring 2016 Membro de USF Tampa, Team 6-4, Eyestone Spring 2016

USFT-EYESTONE-S16S6G4

Membros da 4

Autoria de 5 guias

Um comentário

The Camera is not working anymore. We can`t switch it on, so it could be that the distribution circiut is damaged.

What kind of disitrubution circiut is it? I want to order a spare part.

Babyface - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 7

Duração total: 1,285