Pular para o conteúdo principal

Introdução

Use this guide to remove the batteries and rear panel from your VTech Baby's Learning Laptop.

Peças

Nenhum componente especificado.

  1. To remove the battery door, loosen the screw shown using a Phillips #2 screwdriver.
    • To remove the battery door, loosen the screw shown using a Phillips #2 screwdriver.

    • A coin can also be used to loosen the screw.

  2. Remove the battery door.
    • Remove the battery door.

    • Take out the batteries.

  3. Remove the rear panel screws using a Phillips #2 screwdriver.
    • Remove the rear panel screws using a Phillips #2 screwdriver.

    • Two 21.6mm (Long)

    • One 9.8mm (Short)

    • Five 13.8mm (Medium)

  4. Gently pull up on the rear panel. Be careful not to pull on the wire connections.
    • Gently pull up on the rear panel.

    • Be careful not to pull on the wire connections.

    • Rest the laptop open on the table.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Christopher Kourmoulakis

Membro desde: 03-09-2015

373 reputação

3 Guias de autoria

Equipe

USF Tampa, Team 12-2, Blackwell Fall 2015 Membro de USF Tampa, Team 12-2, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G2

4 Membros

7 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 8

Todo: 387