Ir para o conteúdo principal

VTech Baby's Learning Laptop Buttons Replacement

O que você precisa

  1. VTech Baby's Learning Laptop Buttons Replacement, Battery and Rear Panel: passo 1, imagem 1 %32
    • To remove the battery door, loosen the screw shown using a Phillips #2 screwdriver.

    • A coin can also be used to loosen the screw.

  2. VTech Baby's Learning Laptop Buttons Replacement: passo 2, imagem 1 %32
    • Remove the battery door.

    • Take out the batteries.

  3. VTech Baby's Learning Laptop Buttons Replacement: passo 3, imagem 1 %32
    • Remove the rear panel screws using a Phillips #2 screwdriver.

    • Two 21.6mm (Long)

    • One 9.8mm (Short)

    • Five 13.8mm (Medium)

  4. VTech Baby's Learning Laptop Buttons Replacement: passo 4, imagem 1 %32 VTech Baby's Learning Laptop Buttons Replacement: passo 4, imagem 2 %32
    • Gently pull up on the rear panel.

    • Be careful not to pull on the wire connections.

    • Rest the laptop open on the table.

  5. VTech Baby's Learning Laptop Buttons Replacement, Buttons: passo 5, imagem 1 %32
    • Using a Phillips #0 screwdriver remove the two 6.0mm screws.

  6. VTech Baby's Learning Laptop Buttons Replacement: passo 6, imagem 1 %32 VTech Baby's Learning Laptop Buttons Replacement: passo 6, imagem 2 %32
    • Lift up on the board and set it aside.

    • Movement of the board will be limited. Be careful not to damage the connection to the motherboard.

  7. VTech Baby's Learning Laptop Buttons Replacement: passo 7, imagem 1 %32
    • Remove each button and button contact.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Equipe

USF Tampa, Team 12-2, Blackwell Fall 2015 Membro de USF Tampa, Team 12-2, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G2

Membros da 4

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 10

Duração total: 815