Ir para o conteúdo principal

Unnecto Drone M Headphone Jack Replacement

O que você precisa

  1. Unnecto Drone M Headphone Jack Replacement, Unnecto Drone M Disassembly: passo 1, imagem 1 %32 Unnecto Drone M Headphone Jack Replacement, Unnecto Drone M Disassembly: passo 1, imagem 2 %32
    • Place the phone facedown on a cleared work area

    • Remove the back case by applying moderate force to the indentation in the lower left corner of the case.

  2. Unnecto Drone M Headphone Jack Replacement: passo 2, imagem 1 %32
    • Grip the top right corner of the battery.

    • Remove the battery by pulling it outwards.

  3. Unnecto Drone M Headphone Jack Replacement: passo 3, imagem 1 %32
    • Remove the four screws on the back of the phone using a Philips 000 screwdriver

  4. Unnecto Drone M Headphone Jack Replacement: passo 4, imagem 1 %32
    • Separate the frame evenly using a plastic opening tool.

    • Be careful, as the frame is thin and can break easily.

  5. Unnecto Drone M Headphone Jack Replacement: passo 5, imagem 1 %32 Unnecto Drone M Headphone Jack Replacement: passo 5, imagem 2 %32
    • Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.

  6. Unnecto Drone M Headphone Jack Replacement: passo 6, imagem 1 %32
    • Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.

  7. Unnecto Drone M Headphone Jack Replacement: passo 7, imagem 1 %32
    • Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.

    • The white circuit is flimsy and securely glued to the frame.

  8. Unnecto Drone M Headphone Jack Replacement: passo 8, imagem 1 %32 Unnecto Drone M Headphone Jack Replacement: passo 8, imagem 2 %32
    • Set aside the circuit board from the screen protector.

  9. Unnecto Drone M Headphone Jack Replacement, Headphone Jack: passo 9, imagem 1 %32 Unnecto Drone M Headphone Jack Replacement, Headphone Jack: passo 9, imagem 2 %32 Unnecto Drone M Headphone Jack Replacement, Headphone Jack: passo 9, imagem 3 %32
    • Desolder the headphone jack using a soldering iron on each of the 6 points holding it down.

    • Be careful to not damage the circuit board.

  10. Unnecto Drone M Headphone Jack Replacement: passo 10, imagem 1 %32 Unnecto Drone M Headphone Jack Replacement: passo 10, imagem 2 %32
    • Solder on a new headphone jack.

  11. Unnecto Drone M Headphone Jack Replacement: passo 11, imagem 1 %32
    • Make sure the new jack is aligned properly and securely soldered to the circuit board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 169