1. Place the phone facedown on a cleared work area
    • Place the phone facedown on a cleared work area

    • Remove the back case by applying moderate force to the indentation in the lower left corner of the case.

    Adicionar comentário

  2. Grip the top right corner of the battery.
    • Grip the top right corner of the battery.

    • Remove the battery by pulling it outwards.

    Adicionar comentário

    • Remove the four screws on the back of the phone using a Philips 000 screwdriver

    Adicionar comentário

    • Separate the frame evenly using a plastic opening tool.

    • Be careful, as the frame is thin and can break easily.

    Adicionar comentário

    • Use a Phillips #000 screwdriver to remove the four screws that secure the motherboard.

    Adicionar comentário

    • Disconnect the ribbon cable from the motherboard using rounded, spade-tipped tweezers.

    Adicionar comentário

    • Peel the white circuit on left side of the frame by inserting fine-tipped tweezers between it and the frame.

    • The white circuit is flimsy and securely glued to the frame.

    Adicionar comentário

    • Set aside the circuit board from the screen protector.

    Adicionar comentário

    • Peel back the speaker using fine-tipped tweezers

    • Use caution when removing the earpiece speaker

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Todo: 43