Ir para o conteúdo principal

Uniden UTAB71 Camera Replacement

O que você precisa

  1. Uniden UTAB71 Camera Replacement, Camera: passo 1, imagem 1 %32 Uniden UTAB71 Camera Replacement, Camera: passo 1, imagem 2 %32
    • Use a plastic pry tool to separate the two halves of the tablet.

    • Make sure to be gentle with the pry tool and work your way around the edges of the tablet slowly.

    • Make sure the tablet is powered off before prying open.

    • There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.

  2. Uniden UTAB71 Camera Replacement: passo 2, imagem 1 %32 Uniden UTAB71 Camera Replacement: passo 2, imagem 2 %32
    • Use a credit card to lift the battery off the back of the tablet.

    • Do not put any pressure on the motherboard or any other internal components.

    • The battery is glued onto the back of the tablet so make sure to apply as much pressure as needed

  3. Uniden UTAB71 Camera Replacement: passo 3, imagem 1 %32
    • Undo the clips off the power ribbon connecting the camera to the motherboard using the blue pry tool.

  4. Uniden UTAB71 Camera Replacement: passo 4, imagem 1 %32 Uniden UTAB71 Camera Replacement: passo 4, imagem 2 %32 Uniden UTAB71 Camera Replacement: passo 4, imagem 3 %32
    • Use the pry tool to remove the yellow tape from the power ribbon connected to the camera.

    • Place the plastic pry tool under the camera component and lift it off the tablet.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Ryan Jewell

Membro desde: 10/20/16

422 Reputação

Autoria de 4 guias

Equipe

UMass Dartmouth, Team 5-4, Martin Fall 2016 Membro de UMass Dartmouth, Team 5-4, Martin Fall 2016

UMASSD-MARTIN-F16S5G4

Membros da 3

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 164