Ir para o conteúdo principal

Uniden D1483-3BK Handset Keypad Replacement

O que você precisa

  1. Uniden D1483-3BK Handset Keypad Replacement, Battery: passo 1, imagem 1 %32
    • Set the phone with dial keys facing downward.

  2. Uniden D1483-3BK Handset Keypad Replacement: passo 2, imagem 1 %32 Uniden D1483-3BK Handset Keypad Replacement: passo 2, imagem 2 %32
    • Slide the battery cover toward the bottom of the phone.

    • Lift and remove the back cover from the phone.

  3. Uniden D1483-3BK Handset Keypad Replacement: passo 3, imagem 1 %32
    • Remove the battery from its compartment.

    • Pinch the end of cord where the battery is attached to the phone and pull up gently.

  4. Uniden D1483-3BK Handset Keypad Replacement, Handset Case: passo 4, imagem 1 %32 Uniden D1483-3BK Handset Keypad Replacement, Handset Case: passo 4, imagem 2 %32
    • Remove the two 9mm Phillips #1 screws in the battery compartment.

  5. Uniden D1483-3BK Handset Keypad Replacement: passo 5, imagem 1 %32 Uniden D1483-3BK Handset Keypad Replacement: passo 5, imagem 2 %32 Uniden D1483-3BK Handset Keypad Replacement: passo 5, imagem 3 %32
    • Use the plastic opening tool to carefully separate the two halves of the case.

    • Slowly work around the entire case to fully separate the halves before pulling them apart.

    • Wires inside the case hold the two halves together, tearing these wires will lead to a need for additional repair.

  6. Uniden D1483-3BK Handset Keypad Replacement: passo 6, imagem 1 %32 Uniden D1483-3BK Handset Keypad Replacement: passo 6, imagem 2 %32
    • Carefully remove the 9mm Phillips #1 screw from the top corner of the circuit board.

  7. Uniden D1483-3BK Handset Keypad Replacement: passo 7, imagem 1 %32 Uniden D1483-3BK Handset Keypad Replacement: passo 7, imagem 2 %32
    • Carefully grasp either side of the circuit board and lift it straight out of the front half of the case.

    • Set the board in the lower half of the case.

  8. Uniden D1483-3BK Handset Keypad Replacement, Handset Keypad: passo 8, imagem 1 %32
    • Remove the rubber keypad from the front half of the handset case.

    • The keypad comes in two separate pieces.

Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas executaram este guia.

Arbitrary Name

Membro desde: 01/28/15

1.083 Reputação

Autoria de 4 guias

Equipe

Penn State, Team 1-8, Kaschak Winter 2015 Membro de Penn State, Team 1-8, Kaschak Winter 2015

PSU-KASCHAK-W15S1G8

Membros da 4

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 203