Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

UTStarcom XV6700 Camera Replacement

O que você precisa

  1. UTStarcom XV6700 Camera Replacement, Battery: passo 1, imagem 1 %32
    • Press the on/off button on the top to power the phone off.

  2. UTStarcom XV6700 Camera Replacement: passo 2, imagem 1 %32
    • Remove the battery cover by pressing and sliding the cover down and off of the phone.

  3. UTStarcom XV6700 Camera Replacement: passo 3, imagem 1 %32 UTStarcom XV6700 Camera Replacement: passo 3, imagem 2 %32 UTStarcom XV6700 Camera Replacement: passo 3, imagem 3 %32
    • Pull the battery removal tab and lift the battery out of the phone.

    • If the battery removal tab is missing, place a spudger on the opposite side of the highlighted connector and pry the battery up.

  4. UTStarcom XV6700 Camera Replacement, Camera: passo 4, imagem 1 %32
    • Remove the two 4.0-mm #000 Phillips screws at the top of the battery compartment. Tweezers may be useful to remove the screws.

  5. UTStarcom XV6700 Camera Replacement: passo 5, imagem 1 %32 UTStarcom XV6700 Camera Replacement: passo 5, imagem 2 %32
    • Use firm pressure to carefully pry off the cover with your fingers.

  6. UTStarcom XV6700 Camera Replacement: passo 6, imagem 1 %32
    • Remove the 4.0-mm #00 Phillips screw securing the camera flash circuit board. The board is still connected by a connector on the bottom of the board.

  7. UTStarcom XV6700 Camera Replacement: passo 7, imagem 1 %32
    • Gently pry off the camera flash circuit board with the spudger.

  8. UTStarcom XV6700 Camera Replacement: passo 8, imagem 1 %32
    • Gently pry off the camera with the spudger.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jesse Walker

Membro desde: 06/04/13

201 Reputação

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 175