Ir para o conteúdo principal

Introdução

This guide shows how to replace an ineffective or broken speaker in a Turtle Beach PX22 headset. Soldering skills are needed for this job.

  1. Use your fingers to peel off ear cushion by pinching and pulling off the leather.
    • Use your fingers to peel off ear cushion by pinching and pulling off the leather.

  2. Use a Phillips #00 head screwdriver to remove the three screws located around the speaker (9/32 in length, 1/8 inch head). The housing will come loose. Take note of the position of the wires connected to the speaker.
    • Use a Phillips #00 head screwdriver to remove the three screws located around the speaker (9/32 in length, 1/8 inch head).

    • The housing will come loose. Take note of the position of the wires connected to the speaker.

  3. Desolder the colored wire and copper wires.
    • Desolder the colored wire and copper wires.

Linha de Chegada

5 outras pessoas concluíram este guia.

James de Iturrondo

Membro desde: 18/03/2015

694 Reputação

4 Guias de autoria

Equipe

2 comentários

Does the speaker driver separate from the surrounding plastic disk, so it can be replaced with a like-sized driver, or is the driver plus mounting plate assembly sold as a replacement part?

Michael Merrell - Responder

Where can a new speaker be purchased? It says that there are no parts required but in step 3 it says to have a new speaker. I can't find this online.

jn8ion - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 13

Duração total: 3,243