Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Tungsten E Disassembly

O que você precisa

  1. Tungsten E Disassembly, Tungsten E Disassembly: passo 1, imagem 1 %32 Tungsten E Disassembly, Tungsten E Disassembly: passo 1, imagem 2 %32
    • Remove the stylus and SD card.

    • Using a T5 torx screwdriver, remove all 4 back panel screws.

    • The screws are small and can be lost easily. Be sure to place them in a secure area.

  2. Tungsten E Disassembly: passo 2, imagem 1 %32 Tungsten E Disassembly: passo 2, imagem 2 %32 Tungsten E Disassembly: passo 2, imagem 3 %32
    • Insert a plastic opening tool under the USB and power input slots.

    • Slide the plastic opener along the seam and gently pry the cover from the PDA body to remove the cover completely.

  3. Tungsten E Disassembly: passo 3, imagem 1 %32 Tungsten E Disassembly: passo 3, imagem 2 %32
    • Your device may not have a screen protector. If not, you can move on to step four.

    • Remove the screen protector by lifting the hinge out of the plastic housing.

    • Remove the top cover by gently pulling it away from the device with a plastic opening tool or your fingers.

  4. Tungsten E Disassembly: passo 4, imagem 1 %32 Tungsten E Disassembly: passo 4, imagem 2 %32
    • Carefully remove motherboard from the standoffs without damaging the LCD flex connector.

    • Using a spudger, unlock both sides of the flex connector block by pushing down.

    • Remove motherboard completely.

    • Metal washers may pop out of the device during this step

  5. Tungsten E Disassembly: passo 5, imagem 1 %32 Tungsten E Disassembly: passo 5, imagem 2 %32 Tungsten E Disassembly: passo 5, imagem 3 %32
    • Remove buttons using fingers.

    • Gently flex frame to release screen from plastic frame.

    • Lift out screen.

  6. Tungsten E Disassembly: passo 6, imagem 1 %32
    • Congratulations! You have successfully taken apart a Palm Tungsten E.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Kevin Hom

Membro desde: 01/21/10

103 Reputação

Autoria de 2 guias

Equipe

Cal Poly, Team 13-22, Maness Winter 2010 Membro de Cal Poly, Team 13-22, Maness Winter 2010

CPSU-MANESS-W10S13G22

Membros da 4

Autoria de 4 guias

Um comentário

How does one unplug the battery?

dlcatftwin - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 15

Duração total: 7,777