Introdução

This is a repair guide for battery replacement.

  1. To reach the battery, follow steps 1 through 3 in the Tungsten E Teardown
  2. Begin to pry up the battery.  It is fastened to the mother board using two sided tape.
    • Begin to pry up the battery. It is fastened to the mother board using two sided tape.

    • Caution: the battery is connected by two wires.

  3. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  4. Remove the battery
    • Remove the battery

    • Caution: Be careful not to tear the wires when removing battery.

  5. Using a soldering iron, disconnect the battery wires.
    • Using a soldering iron, disconnect the battery wires.

    • Note: the wires are soldered to the board.

  6. Take replacement battery and solder the wires to the board.
    • Take replacement battery and solder the wires to the board.

    • Take care to match wire colors as before.

    • Use double sided tape to attach battery firmly to board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Kathleen Hix

Member since: 21-01-2010

49 reputação

2 Guides authored

Equipe

Cal Poly, Team 13-22, Maness Winter 2010 Membro de Cal Poly, Team 13-22, Maness Winter 2010

CPSU-MANESS-W10S13G22

4 Membros

4 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 9

Todo: 5,743