Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Trio AXS 3G Speaker Replacement

O que você precisa

  1. Trio AXS 3G Speaker Replacement, Back Case: passo 1, imagem 1 %32
    • On the back of the device there is a white SD card case that shelters the screws that attach the back panel to the tablet.

    • Use your thumbs to slide up and off the small SD card case.

  2. Trio AXS 3G Speaker Replacement: passo 2, imagem 1 %32 Trio AXS 3G Speaker Replacement: passo 2, imagem 2 %32
    • Using the Phillips Head #000, unscrew the 5 4mm and 3mm screws at the top.

  3. Trio AXS 3G Speaker Replacement: passo 3, imagem 1 %32
    • Insert a plastic opening tool between the back panel and the front of the tablet, and gently pry it away from the tablet.

    • Do not pry too hard as the screen is fragile and might crack.

    • It is best to start at the bottom of the tablet when prying the back panel off.

    • The volume piece will also dislodge when the back panel is removed.

  4. Trio AXS 3G Speaker Replacement, Speaker: passo 4, imagem 1 %32
    • Unscrew the two 4 mm #000 screws.

  5. Trio AXS 3G Speaker Replacement: passo 5, imagem 1 %32
    • Use a soldering iron to desolder the speaker connection.

    • Be careful not to melt the wires.

  6. Trio AXS 3G Speaker Replacement: passo 6, imagem 1 %32
    • Remove the speaker.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 160