Conserte seus objetos Comunidade Loja

Tribit XSound Go TS-BTS20 Speaker Replacement

Introdução

Is your Tribit Xsound Go speaker sounding grainy or low? The water, dirt, or even rust may cause a replacement for the speaker driver for a much clear and transparent sound. The following steps are easy to follow.

O que você precisa

  1. Tribit XSound Go TS-BTS20 Speaker Replacement, Speaker: passo 1, imagem 1 %32 Tribit XSound Go TS-BTS20 Speaker Replacement, Speaker: passo 1, imagem 2 %32

    • Insert a spudger in the seam between the front speaker grill and chassis.

    • Pry around the perimeter until the front grill releases.

    • Remove the front grill.

    Editar

  3. Tribit XSound Go TS-BTS20 Speaker Replacement: passo 2, imagem 1 %32 Tribit XSound Go TS-BTS20 Speaker Replacement: passo 2, imagem 2 %32

    • Remove the 14 Phillips screws around the perimeter of the speaker.

    Editar

  4. Tribit XSound Go TS-BTS20 Speaker Replacement: passo 3, imagem 1 %32 Tribit XSound Go TS-BTS20 Speaker Replacement: passo 3, imagem 2 %32 Tribit XSound Go TS-BTS20 Speaker Replacement: passo 3, imagem 3 %32

    • Disconnect both wires connected to speakers and motherboard.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 37

Duração total: 146