Ir para o conteúdo principal

Traxxas Summit Steering Assembly Servo Replacement

O que você precisa

  1. Traxxas Summit Steering Assembly Servo Replacement, Steering Assembly Servo Replacement: passo 1, imagem 1 %32 Traxxas Summit Steering Assembly Servo Replacement, Steering Assembly Servo Replacement: passo 1, imagem 2 %32 Traxxas Summit Steering Assembly Servo Replacement, Steering Assembly Servo Replacement: passo 1, imagem 3 %32
    • Remove each of the four pins that hold the shell by pulling them from the posts.

  2. Traxxas Summit Steering Assembly Servo Replacement: passo 2, imagem 1 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 2, imagem 2 %32
    • Remove the shell by grabbing it with both hands and lifting upwards.

  3. Traxxas Summit Steering Assembly Servo Replacement: passo 3, imagem 1 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 3, imagem 2 %32
    • Disconnect the battery from the device by pulling the black plastic connector apart.

  4. Traxxas Summit Steering Assembly Servo Replacement: passo 4, imagem 1 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 4, imagem 2 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 4, imagem 3 %32
    • Disconnect the four power cables that connect the motor to the electronic speed control.

    • Grab the connectors by their rubber covered metal ends rather than the wire if possible.

  5. Traxxas Summit Steering Assembly Servo Replacement: passo 5, imagem 1 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 5, imagem 2 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 5, imagem 3 %32
    • Unscrew the single 15.5mm long retaining bolt from the motor with the 3mm hex key.

    • Remove the motor by wiggling back and forth while pulling it to the right and up.

  6. Traxxas Summit Steering Assembly Servo Replacement: passo 6, imagem 1 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 6, imagem 2 %32
    • Flip the car on its back to provide access to the steering assembly.

  7. Traxxas Summit Steering Assembly Servo Replacement: passo 7, imagem 1 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 7, imagem 2 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 7, imagem 3 %32
    • Unscrew the servo arm from the steering assembly by removing the 16.3mm long screw with a 2mm hex key.

    • Pull the connecting linkage out of the steering horn.

  8. Traxxas Summit Steering Assembly Servo Replacement: passo 8, imagem 1 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 8, imagem 2 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 8, imagem 3 %32
    • Flip the car back upright.

    • Remove the two 7mm long screws retaining the largest wiring cover with the 2mm hex key.

    • Take the largest wiring cover off.

    • Remove the two 7mm long screws retaining the smaller wiring cover with the 2mm hex key.

  9. Traxxas Summit Steering Assembly Servo Replacement: passo 9, imagem 1 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 9, imagem 2 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 9, imagem 3 %32
    • Remove the second wiring cover.

    • Pull the servo connecter out of the receiver.

    • Work the cable out of the receiver box.

  10. Traxxas Summit Steering Assembly Servo Replacement: passo 10, imagem 1 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 10, imagem 2 %32 Traxxas Summit Steering Assembly Servo Replacement: passo 10, imagem 3 %32
    • Remove the four 9mm long screws that retain the faulty steering servo with the 2.5mm hex key.

    • Pull the servo out.

    • Turning the servo horn by hand may be necessary to fit it through the hole.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 26

Duração total: 2,275