Ir para o conteúdo principal

Traxxas Ford Fiesta ST Rally Motor Replacement

O que você precisa

  1. Traxxas Ford Fiesta ST Rally Motor Replacement, Motor: passo 1, imagem 1 %32 Traxxas Ford Fiesta ST Rally Motor Replacement, Motor: passo 1, imagem 2 %32 Traxxas Ford Fiesta ST Rally Motor Replacement, Motor: passo 1, imagem 3 %32
    • Remove each of the four pins that hold the scale model shell by pulling them from their posts.

    • Remove the shell by lifting it off the chassis using your hands.

  2. Traxxas Ford Fiesta ST Rally Motor Replacement: passo 2, imagem 1 %32 Traxxas Ford Fiesta ST Rally Motor Replacement: passo 2, imagem 2 %32
    • Remove the 3x6 mm screw holding the wire retainer in place using a 2.5 mm hex key.

    • Remove the wire retainer by lifting it off the chassis.

  3. Traxxas Ford Fiesta ST Rally Motor Replacement: passo 3, imagem 1 %32 Traxxas Ford Fiesta ST Rally Motor Replacement: passo 3, imagem 2 %32
    • This guide was done without a battery present. Please remember to properly disconnect any batteries before this step as it could cause injury to you or damage to the device.

    • Disconnect both power cables attaching the electronic speed control to the motor.

  4. Traxxas Ford Fiesta ST Rally Motor Replacement: passo 4, imagem 1 %32 Traxxas Ford Fiesta ST Rally Motor Replacement: passo 4, imagem 2 %32
    • Remove the 3x15 mm retaining bolt using the 3 mm hex key.

    • Remove the 3x6 mm flat head screw holding the motor plate in place with the 3 mm hex key.

  5. Traxxas Ford Fiesta ST Rally Motor Replacement: passo 5, imagem 1 %32 Traxxas Ford Fiesta ST Rally Motor Replacement: passo 5, imagem 2 %32
    • Use the 2.5 mm hex key to remove the 3x6 mm screw for the gear cover.

    • To remove the cover, simply lift it up and off of the chassis.

    • During reassembly, ensure that the motor and gearing line up just how it is in the second photo for this step.

  6. Traxxas Ford Fiesta ST Rally Motor Replacement: passo 6, imagem 1 %32 Traxxas Ford Fiesta ST Rally Motor Replacement: passo 6, imagem 2 %32 Traxxas Ford Fiesta ST Rally Motor Replacement: passo 6, imagem 3 %32
    • Remove the motor by rotating and lifting it free from the chassis.

    • You may need to clean the area where the new motor will be to prevent the possibility of debris becoming a problem for a newly replaced engine.

  7. Traxxas Ford Fiesta ST Rally Motor Replacement: passo 7, imagem 1 %32 Traxxas Ford Fiesta ST Rally Motor Replacement: passo 7, imagem 2 %32 Traxxas Ford Fiesta ST Rally Motor Replacement: passo 7, imagem 3 %32
    • Use the 2.5 mm hex key to loosen the 3x8 mm screws to remove the motor plate.

    • Use the 2 mm hex key to loosen the 3 mm grub screw enough to remove the pinion gear from the motor.

    • Slide the pinion gear right off the motor's external rod when loose enough.

    • Make sure to have the pinion gear in the exact same area as it was on the replaced motor in order to align with the device's gearing.

    • This process can also be used to put an even better motor in as a replacement during reassembly.

Conclusão

Follow these instructions in reverse order to reassemble your device using the new/functioning motor.

Joshua Bailey

Membro desde: 01/28/22

145 Reputação

Autoria de 1 guia

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 12

Duração total: 486