Conserte seus objetos Comunidade Loja

TotalPond Pond Pump Impeller Rubber Stop Replacement

Introdução

The rubber stop at the back end of the impeller spindle serves the purpose of ensuring that the impeller stays on the spindle. This guide states the steps to be followed when replacing the rubber stop.

  1. TotalPond Pond Pump Impeller Rubber Stop Replacement, Impeller Rubber Stop: passo 1, imagem 1 %32 TotalPond Pond Pump Impeller Rubber Stop Replacement, Impeller Rubber Stop: passo 1, imagem 2 %32 TotalPond Pond Pump Impeller Rubber Stop Replacement, Impeller Rubber Stop: passo 1, imagem 3 %32

    • Hold the inlet screen and rotate it counterclockwise to unscrew it. It is helpful to remove the inlet screen so that it is not damaged during the replacement process.

    Editar

  3. TotalPond Pond Pump Impeller Rubber Stop Replacement: passo 2, imagem 1 %32 TotalPond Pond Pump Impeller Rubber Stop Replacement: passo 2, imagem 2 %32 TotalPond Pond Pump Impeller Rubber Stop Replacement: passo 2, imagem 3 %32

    • Firmly hold the pump block with one hand and the impeller housing with the other hand. Rotate impeller housing counterclockwise until it is released.

    Editar

  4. TotalPond Pond Pump Impeller Rubber Stop Replacement: passo 3, imagem 1 %32 TotalPond Pond Pump Impeller Rubber Stop Replacement: passo 3, imagem 2 %32

    • Remove the rubber stop that is attached to the tube that runs through the middle of the impeller.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 2 outros contribuidores

Nicole Santana

Membro desde: 01/13/15

597 Reputação

Autoria de 5 guias

Emblemas: 12

+9 outros emblemas

Equipe

USF Tampa, Team 3-6, Hickman Winter 2015 Membro de USF Tampa, Team 3-6, Hickman Winter 2015

USFT-HICKMAN-W15S3G6

Membros da 4

Autoria de 5 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 618