Introdução

The bulb of a projector is only rated for a certain amount of hours, so when it reaches the end of its life the image will become fuzzy and eventually die out. This guide will show how to replace the bulb on this projector.

Peças

Remove the two screws from the bottom plate as shown. Remove the two screws from the bottom plate as shown.
  • Remove the two screws from the bottom plate as shown.

Adicionar comentário

Remove the two screws on the bulb housing.
  • Remove the two screws on the bulb housing.

Adicionar comentário

Pull the tab up and pull the bulb out vertically. Some force will be required, but it will come out. Replace the bulb with an equivalent one.
  • Pull the tab up and pull the bulb out vertically. Some force will be required, but it will come out.

  • Replace the bulb with an equivalent one.

OMG, is that entire thing the bulb? Or does the bulb get inserted into this piece? It says “replace” as if it it were merely a matter of pushing it in, but I see screws…

lkmemphis - Responder

Conclusão

To reassemble your device, follow these instructions in reverse order.

Bryan Underwood

Member since: 02-04-2018

697 reputação

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 5

Todo: 36